Stud Mount

This is the typical installation method for Injection Molded Plastic Letters. 3/16"diameter studs come out the back of each letter. You can request spacers to allow your letter to stand off the mounting surface. We would need to know how much of a standoff you would like. An installation pattern will be required to ensure proper stud placement. Please be sure to order this with your sign letters
Pad Mount

Clear plastic pads - perforated plastic disks - are glued into the backs of each letter. You would apply clear silicone adhesive to the pad, and affix to the wall. We recommend taping the letter up (6-12 hours) until the silicone has a chance to dry. Spacing Tape will be provided to help position the letters in line. An installation pattern is not required. Ideal for indoors, or outdoors if drilling is not possible. Please note that silicone adhesive may damage the surface if you ever remove the letters.
Semi-Adjustable Combination Mount

A combination mount differs from a stud mount in that the upper portion of the letter has studs and adjustable pads that can be screwed up or down the stud shaft based on the required depth. The bottom portion of the letter will has non-adjustable pad mounts. This method is ideal for uneven surfaces. An installation pattern will be required to ensure proper stud placement