Get A Quote

Our typical lead times vary depending on the type of signage. Rush production options are available.

• Cut Metal or Cut Acrylic Logo – 10-12 working days
• Panel signs – 10-20 working days
• Etched glass signs – 10-15 working days
• Backlit lobby signs – 20-30 working days

• Cast plaques: 12-15 working days
• Etched plaques: 15-20 working days
• Photo relief plaques: 20-25 working days
• Bas relief plaques: approximately 30 working days

• Cut Metal or Cut Acrylic Letters – 8-12 working days
• Cast metal letters – 10-12 working days
• Fabricated stainless steel letters- 15-20 working days
• Backlit letters – 20-30 working days

We ship by FedEx, UPS and freight carriers as needed. Overnight and 2 day options are available. Once your order ships, you will receive a tracking notification by email.

Yes. Please fill out the quote from and attach your logo file in a vector AI EPS, or PDF format.

It depends on how much copy you have and if you will have a portrait or image on the plaque. There are no set standard sizes. In your quote request, let us know the copy for the plaque and if you want a portrait. Based on that information, we can help you determine an appropriate size. Please give us an approximate size you have in mind based on the wall or space you want to install the plaque on. For example - 8”x 12”, 18” x 24”, 24” x 36” - etc.

Yes. We have some of the best, most creative plaque layout artists in the industry. If you provide the copy and images (if needed), we will design your plaque for you. Its best to provide a rough sketch, word document or PDF file of the copy you need. A deposit is required to begin the design process.M

You can also provide your own art. We will need any art files in a vector AI, EPS, or PDF format, with all fonts converted to outlines. Please make sure to follow the minimum letter size rules.

On cast bronze and cast aluminum plaques, we offer Etched photo inserts is a flat, thin etched photo plate is assembled to the plaque.

Photo relief image features a textured low relief sculpted image assembled to your plaque.

Bas relief sculpted portrait is a timeless investment in legacy. The honoree’s portrait is hand sculpted as a 3D image, cast in bronze, and assembled to your plaque.

On etched plaques, a photo or portrait can be etched directly on the plaque.

Our standard lead times vary depending on the type of plaque:

• Cast plaques: 12-15 working days

• Etched plaques: 15-20 working days

• Photo relief plaques: 20-25 working days

• Bas relief plaques: approximately 30 working days

Rush production options are available.

Both are great options! A panel can help make your letters and logo “pop more”, and provide an architectural element to your space. It also makes the sign easier to move and reinstall. If the installation surface is hard to drill many holes in, a panel will be a better option.

Individual letters provide a sharp look with each letter individually mounted and floating off the wall. It can also be moved, but is a little more involved to do so.

Many clients ask about backlighting. It provides a stunning “wow” factor and a bold look. However, it requires adequate access behind the wall and in the ceiling to connect and wire. Backlighting also adds significantly to the cost of the sign and cost of installation.

We typically refer to size of a office lobby sign as the "overall length", for example 4 feet long, 5 feet long, 6 feet long, etc. We will scale the height based on that, proportional to your logo.

The overall length is best approximated by taking a measuring tape and some masking tape into the reception area or wall, actually putting the masking tape on the wall, and then trying to visualize the appropriate size. (If possible, send us your wall image with the masking tape on -- that will help us guide you.)

It is also a matter of personal preference. Some clients want the logo to be larger and more prominent. Others want it smaller, and more subtle. One rule of thumb is to leave enough space on each side of the logo. For example, if your wall is 10 feet wide, a 6 foot logo would give you a 2 feet of space on each side, which would look terrific.

We need your logo file in a clean, outlined vector AI or EPS or PDF format for production. However, a .JPG or other format is fine for quoting purposes.

For production purposes, a JPG or other bitmap format won’t work. Copying the logo from your website won’t work. Simply saving a JPG as an eps won't work either. We need the actual paths to cut the shapes which is provided in a vector file.

Typically, the original designer or your marketing department will have this file. If you don't have it, we can recreate it for a fee.

For cut vinyl, we need your art in a vector AI, EPS or PDF format. For full color graphic prints, we need your files in a high resolution format, to scale for the prints.

We need your logo file in a clean, outlined vector AI or EPS or PDF format for production. However, a .JPG or other format is fine for quoting purposes.

For production purposes, a JPG or other bitmap format won’t work. Copying the logo from your website won’t work. Simply saving a JPG as an eps won't work either. We need the actual paths to cut the shapes which is provided in a vector file.

Typically, the original designer or your marketing department will have this file. If you don't have it, we can recreate it for a fee.

We need your logo file in a clean, outlined vector AI or EPS or PDF format for production. However, a .JPG or other format is fine for quoting purposes.

For production purposes, a JPG or other bitmap format won’t work. Copying the logo from your website won’t work. Simply saving a JPG as an eps won't work either. We need the actual paths to cut the shapes which is provided in a vector file.

Typically, the original designer or your marketing department will have this file. If you don't have it, we can recreate it for a fee.

You will need access behind the wall where the letters are mounted. A wire needs to come inside the wall, behind each letter. You need access to be able to go inside and connect all the wires to an electrical junction in the location behind the sign. In short, you need access and be able to drill through the wall to push the wire in without obstruction. If this is not possible in your wall or building, consider either mounting the letters to a panel or not backlighting your signs.

The lighting is all low-voltage LED. A typical 110 line is fine. We recommend a dedicated line for the sign, along with a method to control it via timer or photocell.