You won’t get passed by with our architectural monument signs
Looking for signage to showcase your subdivision entrance, business park, corporate office, school or house of worship? Choose Impact Signs’ monument signs available in a wide variety of design options and more than 50 standard background colors. Faux stone and brick finishes can be used as accents on the base or columns. All of our cut metal letters (link to page) can be used on one or both sides of your exterior monument sign.
Our monument signs are available in a wide variety of options including:
- HDU foam monument with raised metal letters — Lightweight and durable, these exterior monuments combine the best of both words. They are constructed with a solid EPS foam core and then sealed for durability and strength with a thick polyurethane hardcoat that makes it impervious to rot, termites and moisture . We use an acrylic textured finish to provide resistance against fading, impact and the weather.
- Fabricated aluminum monument signs – A fabricated aluminum box, typically 6-10” deep can be painted to your colors. Detailed trim work and accents are possible as well. Letting can be either raised cut metal and non illuminated or you can choose lettering that is reverse-cut out of the box and illuminated with LEDs. The sign would need to be installed on a concrete pad, with two posts set in by your contractor.
- Cut metal or fabricated stainless steel letters – Our cut metal sign letters are available in wide range of metals including aluminum, stainless steel, Cor-Ten steel, copper, brass and bronze and come with a lifetime guarantee range in thickness from 1/8″ to 1″ and in height from as small as 1/2 up to 72″. Our fabricated stainless steel letters come in thickness of up to 5”, they are ideal when you’re looking for letters with a greater depth. All can be installed on your stone, or masonry monument or entrance wall.
- Backlit stainless steel letters – Create a dramatic halo lighting effect with LED backlit letters installed on your monument sign wall. We insert high-quality, low-voltage LED modules inside the channel letters and provide a lexan backer. During installation, the letters are floated off the wall with spacers — and results are breathtaking, both indoors and outside.
Installation is simple
We pre-assemble all the letters on the sign for you. Installing the sign is very simple with just two holes to dig and two posts to set. See instructions here.
If you choose a lighted monument signs, keep in mind that you’ll need an electrical junction at the sign location. We will provide the power supply (transformer) needed to power the low voltage LEDs. Typically the electrical is run to a concrete pad footing for the sign.
Specifications for Monument Signs